Powder coating
There’s always a queue at the Hellmer powder coating facility even though you don’t see anyone around. It’s the robots that are in charge here.

Hellmer’s 220-metre powder coating line works at a rate of 0.5 to 2 metres per minute. The process is completely computerised, automated and uses the electrostatic powder application technique. Degreasing and phosphating are part of the pre-treatment. This helps the powder coating adhere better. We also offers screen printing of components and parts, with their own equipment for producing templates and printing frames.

Powder Coating Line
The powder line has been designed for maximum flexibility and quality. The conveyer has a total length of 220 metres and a speed of 0.5-2.0 metres a minute.

Electrostatic Powder Application
Our unique powder application system allows the amount of powder per unit of area to be controlled with extreme accuracy. The optimal amount of powder is always used, which in its turn results in a minimum of loss. Due to the fact that new powder is used in the process only, without recycling, the final coating result is of the very best quality.

Screen Printing
Screen printing is implemented with both one and two component ink, with subsequent air or kiln drying. We use our own equipment to make templates and screen print frames.